Description
All-in-one, fast-setting grout for replacing sanded or unsanded grout. Ultracolor Plus FA – with DropEffect Technology – is a non-efflorescence, non-shrinkage, uniform color, polymer-modified, fast-setting, fine aggregate, ultra-premium grout for joints from 1.5 mm to 19 mm wide. mm (1/16" to 3/4"). DropEffect technology reduces surface absorption to help repel water and dirt from penetrating grout joints. Ultracolor Plus FA is specially formulated with MAPEI's Hyperhydration Cement Technology (HCT) to eliminate problems commonly associated with Portland cement grouts, such as color unevenness and efflorescence. In addition to offering a higher polymer content, cementitious hyperhydration technology results in reduced absorbency and improved stain resistance compared to standard quality cementitious grouts.
- Fine aggregate (FA) reduces joint width and improves cleanability
- No efflorescence (without Portland cement)
- Easy to install and stain resistant
- No sealer needed
Specifications
|
Manufacturer
|
Mapei
|
|
Product type
|
Ceramic grout
|
|
Application
|
Commercial and residential
|
|
Certification
|
Indoor air quality (Advantage Gold) and EPD (according to ISO 14025)
|
|
Color
|
Gray
|
|
Manufacturer color
|
Sea Salt
|
|
Approximate coverage detail
|
It depends on the format of the tile and the width of the grout joint (Please refer to the technical sheet)
|
|
Degree of water absorption
|
≤ 5 g after 4 hours
|
|
Lifespan
|
1 year, when stored in the original unopened package at 23°C (73°F), in a dry place
|
|
Jar lifespan
|
30 minutes to 1 hour
|
|
TVOC emissions
|
Between 0.5 mg/m³ and 5 mg/m³
|
|
Maximum spacing (mm)
|
19
|
|
Maximum spacing (in. in fraction)
|
3/4
|
|
Maximum spacing (in.)
|
0.75
|
|
Minimum spacing (mm)
|
1.5
|
|
Minimum spacing (in. in fraction)
|
1/16
|
|
Minimum spacing (in.)
|
0.06
|
|
Collection name
|
Ultracolor Plus FA
|
|
Industry standards and approvals
|
ISO 13007: CG2WAF Classification | ANSI: Meets or exceeds the requirements of industry standards A118.6 and A118.7
|
|
Color number
|
5229
|
|
Weight (kg)
|
4.54
|
|
Weight (lb)
|
10
|
|
Physical properties
|
Powder
|
|
Mixture ratio
|
For 10 lbs of grout powder: 1 to 1.1 U.S. qts. (0.95 to 1.04 L)
|
|
Withdrawal
|
≤ 0.30% withdrawal in 28 days (CG2)
|
|
Abrasion resistance
|
≤ 1,000 mm3
|
|
Compression resistance
|
≥ 15 MPa (2,175 psi) after 24 hours
|
|
Loading time
|
For joints that will be subject to foot traffic after 3 to 4 hours
|
|
Curing time
|
3 days except when the application takes place on a submerged site (swimming pool, spa, aquatic feature or fountain), allow a drying time of 72 hours
|
|
Drying time
|
15 to 30 minutes at 23° C (73° F)
|
|
Maximum installation temperature
|
35° C (95° F)
|
|
Minimum installation temperature
|
10° C (50° F)
|
|
Content of recycled materials before consumption
|
0.1
|
|
Outdoor use
|
Yes
|
|
Indoor use
|
Yes
|
|
Use for
|
For grouting cut stone, slate, granite, stone agglomerates and most ceramic tiles, ceramic mosaic, porcelain stoneware, brick, porcelain, glass and clay
|
