Here is the OTTOVAC from GRABO. Glaziers, rejoice. The OTTOVAC is an all-new power tool that will change the way glaziers move and install glass or any other flat, smooth surface. This is a portable electric suction cup. It comes in the form of a traditional pump suction cup, but it sucks up your material with the simple press of a button, and releases the pressure with that same button. This new tool completely removes the pump action that is traditionally required to obtain suction from the suction cup. Additionally, it also removes any suspicion about whether the tool actually suctions to your glass, as this new tool is equipped with a revolutionary automatic sensor. The automatic on/off sensor is built into the tool and tells the vacuum pump to turn on to create suction and to stop when it reaches sufficient vacuum, being careful not to create too much vacuum. suction and not to break or “jump” your glass. On the other hand, if the tool starts to lose suction or deflate, it will cycle back to restore suction, so you'll always be in the safe zone for as long as you have it need. When the vacuum at the base of the suction cup reaches -55 kPa, the pump automatically stops after a three-second delay.
- When the vacuum level drops below -55 kPa, the pump restarts automatically, reaching the required pressure during operation
- The tool can safely hold up to 200 kg and is powered by 4 AA batteries
Specifications
| Brand |
GRABO |
| Product type |
Electric suction cup |
| Capacity |
200 kg (2.6 lb) |
| Operation time |
> 800 hrs |
| Height (mm) |
90 |
| Width (mm) |
200 |
| Liquidation |
false |
| Length (mm) |
200 |
| Collection name |
Ottovac |
| Weight (kg) |
1.2 |
| Weight (lbs) |
2.6 |
| Quantity per pallet |
360.00 |
| Quantity per package |
6.00 |
| Power (W) |
6 |
| Use temperature |
0-60°C (32-140°C) |
| Battery type |
4x AA batteries |
| Voltage (V) |
6 |
