3D4M - 36" - Sigma Serie 3 Max Tile Cutter

Description< /p>

The Max Series push handle creates less user fatigue than the traditional pull handle. It is equipped with a spring-loaded wheel that wraps around a stainless steel ball bearing. This not only ensures the smoothest feel possible, but gives the wheel the ability to adapt to the undulations of a textured surface. The results are incredible! Series 3 MAX“New series with max handle.” The ball-bearing grooving wheel is vibration-damped to mark thicker tiles or tiles with raised surfaces with minimal effort. The transition from the scoring position to the breaking position is obtained by a small vertical movement of the handle. Wide tile support table, with the added benefit of measuring conveniently close to the operator. Double registration for cutting thickness regulation. The swivel measuring bar supporting the tile rotates 45° in both directions and is pivoted to the center of the cutting line, providing the actual measurement of the piece to be cut. A measuring scale at 45° per second gives the length of the diagonal. Measurements are in centimeters or inches upon request. The quick positioning button makes the main angles normally used immediately available. Easy to disassemble to ensure compact dimensions for easy transport. Push cutting system Extremely strong, allows particularly thick or difficult materials to be cut easily, with the added benefit of measuring conveniently close to the operator. Precision, practical use and low weight are the main characteristics of Sigma tile cutters. Suitable for cutting all types of commercially available tiles. Made with high strength aluminum alloy and steel structure in a wide range of models, also with accessories for diagonal cuts. The special shape of the handle allows tiles to be cut at any time. Movement on bearings, recording for wear recovery on the sides, plastic fittings to avoid marks under brittle feet. The lever handle is used to score the tile with a tungsten carbide wheel. The tile is then broken by pressing with the breaking feet near the edge of the tile. .

• Super smooth ball bearing centered on 19mm wheel
• The spring suspension system is particularly suitable for uneven and edged tiles
• Score when pushing (can also pull)
• The rocker breaker allows you to break the entire length of the tile
• The rotating ruler / measuring bar rotates up to 45 degrees in both directions
• True spring loaded baseplates
• Excellent on porcelain tiles
• Maximum tile thickness: 20 mm (NOT RECOMMENDED FOR 20 mm THICK PORCELAIN)
• Smart duel metric scale for square and 45 degree cuts (measuring from tile corner to cut line)

Specifications